Owners Manual

USER GUIDE

u-line.com

Door Adjustments

HINGE COVER

Hinge cover included with the literature bag is optional.

To install hinge cover:

1. Press hinge cover squarely over hinge.

DOOR ALIGNMENT AND ADJUSTMENT

Align and adjust the door if it is not level or is not sealing

properly. If the door is not sealed, the unit may not cool

properly, or excessive frost may form in the interior.

NOTICE

Properly aligned, the door’s gasket should be

rmly in contact with the cabinet all the way

around the door (no gaps). Carefully examine the

door’s gasket to ensure that it is rmly in contact

with the cabinet. Also make sure the door gasket

is not pinched on the hinge side of the door.

To align and adjust the door:

1. Gently pry o hinge cover from top of unit.

2. Loosen (do not remove) top and bottom hinge screws

using a Torx T-25 screwdriver on the top and a 1/4”

socket on the bottom.

3. Align door squarely with cabinet.

4. Make sure gasket is rmly in contact with cabinet all

the way around the door (no gaps).

5. Tighten bottom hinge screws.

6. Tighten top hinge screws and replace hinge cover.

REVERSING THE DOOR

Location of the unit may make it desirable to mount the

door on the opposite side of the cabinet.

The hinge hardware will be removed and reinstalled on the

opposite side of the cabinet.

TO REVERSE THE DOOR

Remove top hinge and door:

1. Remove hinge cover from top of unit

2. Hold door to keep it from falling.

3. Remove top hinge from cabinet using a Torx T-25

screwdriver to remove three screws.

Hinge Cover