Owners Manual

USER GUIDE

u-line.com

Grille Installation

REMOVING AND INSTALLING GRILLE

Disconnect electric power to the unit before

removing the grille.

When using the unit, the grille must be installed.

DO NOT touch the condenser ns. The condenser

ns are SHARP and can be easily damaged.

Removing the grille

1. Disconnect power to the unit.

2. Loosen the two screws (1).

3. Remove grille (2) from unit.

Installing the grille

1. Align cabinet and grille holes and secure, but do not

over tighten grille screws (1).

Note: When installing next to a 15” wide U-Line

product, use the supplied spacers behind the

grille. The 24” grille will now be on the same

plane as the 15” grille.

2. Reconnect power to the unit.

WARNING