User Manual

USER GUIDE

u-line.com

Interior Adjustments

All 5 Class models feature side mounted rack supports with

19 adjustment positions.

All refrigerators ship with 3 Slide and Secure storage bins.

Remove and reposition as desired.

Slide and Secure Storage Bin Removal

1. Empty and remove bin.

2. Firmly grasp both sides of storage bin frame and lift

front end slightly (about 1/4”) to center the pin in the

slot.

3. Pull frame towards you until all pins are clear of the

slots. If only repositioning the frame, do not remove

completely - go to “Storage Bin Installation” Step 2.

4. Slightly tilt one side. Gently pull frame towards you to

remove from unit.

Note: Take care when removing frame to avoid

scratching interior of unit.

5. Once removed, retract the slides.

Note: The slides on the frame have a thin coating

which is used to block moisture and provide

lubrication. Use care when handling.

Slide and Secure Storage Bin Installation

1. Insert empty storage bin frame into unit with one side

tilted slightly downward until back pin is between front

and rear rail supports.

2. Tilt frame back to horizontal and line up 2 back pins

with rear rail support. Line up left side of frame with

rear and front rail support. Continue inserting frame

until both pins engage. The front will set down slightly

and lock into place. Repeat on right side.

3. Fully extend frame, position bin over frame and lower

(rear rst) into position.

Slide and Secure Storage Bins

Glass inserts are designed so bottles and cans sit at. The

inserts may be removed when storing produce or other

items. The ridges in the bottom facilitate air ow.

Clean the storage bins with soap and water.

Center

the pin

Center

the pins

Front Pin

Back Pin