User Guide
USER GUIDE
u-line.com
Control Operation
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION COMMAND NOTES
ON/OFF Press and release Unit will immediately turn On or OFF
Adjust Temperature Press or and release 
When the display is ashing, press      or      to 
adjust the set point temperature. Note: temperature 
displayed is the actual temperature inside unit
Toggle between 
o
F / 
o
C Hold and for 5 seconds The display will change units
Leave interior light on
Press and release to leave interior 
light on for 12 hours; press again to 
deactivate
After 12 hours, factory default is restored; light will 
turn on when door is open
Adjust light color
While holding      press and release      
to scroll through lighting options
 Option Open Door Closed Door
 00 White White
 01 Blue  Blue
 02    White   Blue
Light will be set at full intensity when door is open, 
and 50% intensity when door is closed.
Enable Sabbath Mode
Press and hold for 5 seconds and 
release
The 
o
F / 
o
C symbol will ash briey after 5 seconds. 
Interior light and display will go dark and remain so 
until  user  resets  mode  -  unit  continues  to  operate                
Disable Sabbath Mode Press            and  release                                                                                  Display and interior light return to normal operation
This unit is Star-K certied. See www.star-k.org for more details.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
•  A tone will sound for several seconds every minute
•   will appear in display
•  Closed door to silence alert and reset
16










