QUICK START GUIDE 5 CLASS DUAL ZONE 30616_B
USER GUIDE QUICK START GUIDE u-line.com u-line.com WELCOME TO U-LINE Congratulations on your U-Line purchase. Your product comes from a company with over five decades of premium modular ice making, refrigeration, and wine preservation experience. U-Line creates products focused on functionality, style, and inspired innovations — paying close attention to even the smallest details. Applications include residential, outdoor, ADA height compliant, marine, and commercial.
QUICK START GUIDE u-line.com This Quick Start Guide covers the basics of installation and general use of your product.
QUICK START GUIDE u-line.com Safety and Warning ! DANGER NOTICE This unit contains R600a (Isobutane) which is a Please read all instructions before installing, flammable hydrocarbon. It is safe for regular operating, or servicing the appliance. use. Do not use sharp objects to expedite defrosting.
QUICK START GUIDE u-line.com Environmental Requirements NOTICE This model is intended for indoor/interior applications only local codes. This unit requires connection to a Electrical installation must observe all state and grounded (three-prong), polarized receptacle and is not to be used in installations that are open/ exposed to natural elements. that has been placed by a qualified electrician.
QUICK START GUIDE u-line.com Door Swing around the door (no gaps). Carefully examine the For Integrated models that are installed adjacent to a wall, with the cabinet. Also make sure the door gasket door’s gasket to ensure that it is firmly in contact is not pinched on the hinge side of the door. 1/2” (13 mm) clearance is recommended from wall on hinge side to allow the door to open 90°.
QUICK START GUIDE u-line.com REVERSING THE DOOR 2. If the unit is not level, adjust the legs on the corners of the unit as necessary. 1. Open door. 2. Using T-25 Torx bit loosen screw #1 and remove screw #2 on top and bottom hinge. Slide and remove the door from the unit. Turn to Adjust 3. Confirm the unit is level after each adjustment and repeat the previous steps as needed.
QUICK START GUIDE u-line.com Anti-Tip Bracket Surrounding area (Top view) Use one of the methods below to secure the unit CABINET/COUNTER ANTI-TIP INSTALLATION (For built-in applications) 1. Back of unit Back wall Slide unit out so screws on front of unit are easily accessible. B Remove the two screws from the front of the unit. A 2. A CL Front of unit 5. 3. 518 524 7 5⁄8” 9” 11 15⁄16” B 22” 22” 22” Place the anti-tip brackets on the floor against the line drawn for the outer edge.
QUICK START GUIDE u-line.com Integrated Panel Installation 8. Integrated Models Only with your unit. 1. Fully open door. 2. Starting at corner, pull gasket 9. overtighten screws. Continue to pull gasket free from gasket channel. 4. Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not away from door. 3. Locate 6 of the #6x 1-1/2” (38 mm) screws provided 10.
QUICK START GUIDE u-line.com Control Operation - Dual Zone Beverage Centers CONTROL FUNCTION GUIDE FUNCTION COMMAND NOTES ON/OFF Press Unit will immediately turn On or OFF and release Interior light color indicates zone temperature being set; Blue = lower (38o - 65o) White = upper (38o - 65o) Adjust Temperatures Press or and release to adjust the lower zone. Press to change to upper zone. Press or and release to adjust. The upper temperature must be ≥ the lower temperature, maximum 20o higher.
QUICK START GUIDE u-line.
QUICK START GUIDE u-line.com Control Operation - Dual Zone Wine CONTROL FUNCTION GUIDE FUNCTION COMMAND NOTES ON/OFF Press Unit will immediately turn On or OFF and release Interior light color indicates zone temperature being set; Blue = lower (38o - 65o) White = upper (38o - 65o) Adjust Temperatures Press or and release to adjust the lower zone. Press to change to upper zone. Press or and release to adjust. The upper temperature must be ≥ the lower temperature, maximum 20o higher.
QUICK START GUIDE u-line.com First Use Dual Zone Temperature Table Initial startup requires no adjustments. When plugged Wine Dual Zone in, the unit will begin operating under the factory default Lower: 38° - 65° Upper: 38° - 65° Minimum Maximum 38 38 58 turn the unit off, press 39 39 59 NOTICE 40 40 60 41 41 61 42 42 62 43 43 63 to reach set point varies based upon ambient temperature, 44 44 64 temperature of product loaded, door openings, etc.
QUICK START GUIDE USER GUIDE u-line.com u-line.com Airflow & Product Loading NOTICE Restricting airflow may result in poor product AIRFLOW performance, product failure, and uneven External internal temperatures and may freeze contents.
QUICK START GUIDE u-line.com Interior Adjustments 5. Once removed, retract the slides. Note: The slides on the rack have a thin coating which Dual Zone Beverage Centers feature side mounted rack is used to block moisture and provide lubrication. Use supports with 17 adjustment positions. care when handling. All units ship with wine racks. Beverage Centers include Slide and Secure Storage Bin and slide out shelf. Remove Installation and reposition as desired. 1.
QUICK START GUIDE u-line.com Wine Storage Options 3. Pull frame towards you until all pins are clear of the slots. If only repositioning the frame, do not remove WINE RACK BOTTLE POSITION completely - go to “Storage Bin Installation” Step 2. Specially designed horizontal wine racks properly position 4. the bottles so the wine remains in contact with the cork, Slightly tilt one side. Gently pull frame towards you to remove from unit. which ensures the cork does not become dry.
QUICK START GUIDE u-line.com Cleaning Rinse the interior using a soft sponge and clean water. Stainless Models Do not use any solvent-based or abrasive Stainless door panels, handles and frames can discolor and/or odor to the interior products and damage or cleaners. These types of cleaners may transfer taste when exposed to chlorine gas, pool chemicals, saltwater or discolor the interior. cleaners with bleach.
U-Line Corporation (U-Line) Limited Warranty One Year Limited Warranty For one year from the date of original purchase, this warranty covers all parts and labor to repair or replace any part of the product that proves to be defective in materials or workmanship. For products installed and used for normal residential use, material cosmetic defects are included in this warranty, with coverage limited to 60 days from the date of original purchase.
