User Guide & Service Manual
USER GUIDE
u-line.com
Cleaning
Remove LED Light Cover
1.
from ceiling. LED light strip will hang down loosely.
2. Thoroughly clean and sanitize LED light cover
Note: DO NOT clean the LED light strip.
Reinstall LED Light Cover
1. Insert LED light strip into center slots of light cover
and hold in place.
2. Line up tabs on light cover with slots on ceiling light
3.
cover until it snaps into place.
Hinge Pin
Bracket
Remove Door, Brackets, and Hinge
1. Hold door to keep it from falling.
2. Remove top hinge pin.
3.
bottom hinge.
4. Take out screws and remove both hinges.
5.
Repeat for bottom surface of door.
6. Thoroughly clean and sanitize all surfaces of the door,
the brackets, hinges, and all hardware.
7. Reinstall hinges, door, and all hardware by reversing
steps 1-5 above.
Hinge
Hinge
Hinge Pin
Bracket
SLOT
TAB
LED
LIGHT STRIP
LIGHT COVER
22