Guide & Service Manual

OPERATION

1.10 MATERIALS AND REFRIGERANTS

 Materials in contact or potentially in contact with products are in compliance with the

relevant directives. The equipments designed and built so that contact parts can be cleaned

before each use. The refrigerants utilized comply with established regulations.

1.11 WARNING LABELS

Electrical Shock

LABEL A

Use of this equipment involves power supplies which convert line

voltage to low voltage power. Do not modify or use power supplies

other than OEM equipment. Connection of the power supply may

require a properly grou

nded receptacle. Potential for electrical

shock or equipment damage exists if precautions are not followed.

Hot Surface

LABEL B

Avoid contact with the hot surfaces potential for skin’s burns.

Cold Surface

LABEL C

Avoid contact with cold freezer surfaces potential for cold burns or

skin sticking to cold surfaces.

Safety Alert

LABEL D

Important operating instructions. To reduce the risk of injury or poor

performance of the unit read the user manual before putting the

equipment into operation

Warning

Indicates an immediately hazardous situation, which if not avoided,

will result in death or serious injury

Caution

Indicates an immediately hazardous situation, which if not avoided,

may result in minor to moderate injury

Battery

LABEL E

Indicates the location of the back-up battery

Risk of fire

LABEL F

Risk of fire or explosion. Flammable refrigerant used. Follow

handling instruction carefully. To be repaired only by trained service

Personnel. Do not puncture Refrigerant Tubing.

Use and Operational Manual