User Guide & Service Manual

USER GUIDE
u-line.com
Cutout & Product Dimensions
Cutout & Product Dimensions
PREPARE SITE
Your U-Line product has been designed for either free-
standing or built-in installation. When built-in, your unit
does not require additional air space for top, sides, or
rear. However, the front grille must NOT be obstructed,
and clearance is required for an electrical connection in
the rear.
CAUTION
!
Unit can NOT be installed behind a closed cabinet
door.
If you would like to align the face of the unit with
other adjacent cabinet doors, you may need to
alter the wall just behind the drain connection on
the unit to accommodate the drain.
CUTOUT DIMENSIONS
*15” Cutout width sucient if door protrudes beyond
adjacent cabinetry
PRODUCT DIMENSIONS
REAR
FRONT
TOP
SIDE
4" (102 mm)
7"
(178 mm)
15 "
(386 mm)
34 "
(870 mm)
Preferred location
for electrical outlet
is in an adjacent
cabinet.
24"
(610 mm)
"
(16 mm)
2”
(51 mm)
4”
(102 mm)
Drain
Water Line
7
½ ”
(191 mm)
3
⁄ ”
(80 mm)
4”
(102 mm)
7
½ ”
(191 mm)
Power Cord
6 ft (183 cm)
14 ⁄”
(379 mm)
3 ½”
(89 mm)
28”
(711 mm)
34”
(863 mm)
1 ⁄”
(48 mm)
15 ⁄”
(395 mm)
21 ⁄”
(535 mm)
10 ⁄”
(260 mm)
22 ⁄”
(576 mm)
24 ⁄”
(624 mm)
4 ⁄“ (106 mm)
8