User Guide & Service Manual
USER GUIDE
u-line.com
Cleaning
from the ice dispenser tube and exit from the vent 
tube while pouring. Omit this step if no ice is in the   
ice dispenser tube.
3.   Press and release
a. 02 will appear in the display
b. Mix 4 ounces of SafeCLEAN Plus™ with 2 quarts of        
 potable water.
4.  Wait until 03 appears in the display
 a. Using the funnel and cleaning tube, slowly pour             
   of the cleaning solution into the dispenser    
  tube. Air and some water will exit the vent tube.       
  
 
 b. Press and release 
5. 04 will appear in the display
a. The machine will circulate the solution, cleaning   
  and sanitizing the internal components, for                 
  approximately 20 minutes.
b. While the machine is circulating the cleaning   
  solution, use  of the remaining cleaning solution         
 and a sponge to wipe down the inside of the ice bin  
  and scoop. Rinse with clean potable water. 
6.  When 05 appears in the display, 3 soft tones will         
sound, indicating the cleaning phase is complete
 
rotating  turn counterclockwise.
 b. Use the remaining cleaning solution to wipe the   
manifold and surrounding area. Rinse with clean  
potable water.
c. Using the hose and funnel, slowly pour 1.5 quarts  
   
   dispenser tube. Air and some water will exit the 
  vent tube.
 turn 
   clockwise
e. Press and release
7. 06 will appear in the display
a. Reinstall shield and close door.
b. The machine will circulate water and perform 
 
   minutes.
c. The unit will resume making ice - indicated by 3 
   soft tones and ICE scrolling in the display. 
Cleaning Tube
 and Funnel
Ice
Dispenser
Tube
Vent Tube
Manifold
26










