Quick Start Guide

QUICK START GUIDE
u-line.com
14
Temperature displayed reects actual
temperature inside unit.
Initial startup requires no adjustments. If the unit was
turned o, press and hold for 5 seconds to turn unit on.
See “Control Operation” section for more details.
If the temperature displayed is dierent than selected, the
unit is progressing towards the selected temperature. Time
to reach set point varies based upon ambient temperature,
temperature of product loaded, door openings, etc. U-Line
recommends allowing the unit to reach set points before
loading.
To dispense cold coee, make sure the components are
assembled according to the instructions in GENERAL
INSTALLATION.
NOTICE
First Use
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION COMMAND NOTES
ON/OFF Press and hold for 5 seconds Unit will turn On or OFF
Adjust Temperature Press or and release
When the display is ashing, press or to
adjust the set point temperature.
Toggle between
º
F /
º
C Hold and for 5 seconds The display will change units