Installation Guide

5.0 Installation
Below countertop
5.1 Cut Hole
For hole cutting - see section 3.2
(if necessary)
For vented installations - see section 4.2
5.2 Cut Vent
(if necessary)
For washer installation - see section 3.4
5.3 Insert Washer
Carefully lift the U-Chill
TM
from the box using
two hands
Align logo to desired position
Lower slowly into hole
Push down evenly on top of the crown until
ush with the countertop, clearing any
protective lm
5.4 Align & Lower U-Chill
TM
Plug the U-Chill
TM
into the supplied 12V
power adapter
Once the product detects power, it will turn on
automatically
The U-Chill
TM
will automatically go into standby
after 4 hours without use
To turn on during standby, simply touch
the crown
5.6 Power On & Enjoy!
Twist the clamp onto the U-Chill
TM
until it is
fastened tightly against the underside of the
countertop, making sure not to twist the logo
out of alignment.
5.5 Thread Clamp