User Guide & Service Manual
USER GUIDE
 Interior Shelves 1
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Interior Shelves
REMOVING AND INSTALLING GLASS SHELVES
Adjusting Interior Shelves
Models equipped with glass shelves have an adjustable 
mounting system. To adjust or simply remove shelves for 
cleaning, follow the instructions below.
1. Remove all product from shelf.
2. Coming from underneath the shelf, lift both the front 
and rear of the glass. 
3. Carefully slide shelf out of unit being careful not to 
scratch the interior liner. 
4. Installation is the reverse of removal.
Adjusting Shelf Height
Shelf height may be adjusted to accommodate a broad 
range of product. To alter your shelf spacing follow the 
instructions below. 
1. Remove the 4 Shelf clips from the shelf clip holes.
2. Move shelf clips as a group to the desired shelf height.
3. Insert shelf clips into the holes of the desired shelf 
height. Be certain shelf clip is fully seated into shelf clip 
hole.
CAUTION
!
Clips MUST be installed with the ribbed side 
down. Failure to do so may result in shelf or unit 
damage.
NOTICE
All 4 shelf clips for each shelf must be installed 
at the same height for shelf stability.
4. Reinstall shelf.
Cleaning Shelves
Shelves may be cleaned in a soapy warm water solution. 
A general household disinfectant may be used if 
necessary. Be sure to completely dry your shelf before 
reinstalling.
Clip 
Holes
22










