User Guide & Service Manual
USER GUIDE
Remove Fan and Cover 2
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
12.Remove the 4 screws mounting the fan shroud to the 
evaporator plate. 
13.Remove and replace fan. Take special care to properly 
route fan wire. 
NOTICE
Fan must be oriented to pull air in through lower 
evaporator plate vents and push air out at fan 
mounting location.
14.Installation is the reverse of removal.
15.Use seanant gum to seal any holes in the rear of the 
unit before replacing the rear cover.
16.Reinstall the unit taking care to level, center and 
secure as you found it. 
Air Flow
53










