User Guide and Service Manual
USER GUIDE
Door Adjustments 3
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
SHIFTING WINE RACK SPACERS (OPTIONAL)
NOTICE
Only perform these steps if you require wine 
rack clearance with a 90° door opening. Doors 
which are allowed to open past 90° do not 
require this step. 
1. Remove wine rack (see WINE RACK INSTALLATION in 
Maintenance).
2. Starting from the side that has the spacers (previously 
unaltered units will be on the right hand side from the 
factory), remove 2 screws, slide and spacer.
3. Reinstall the slide with the original 2 screws.
4. Remove 2 screws from the other side.
5. Place the spacer in between the liner and slide.
6. Install original hardware.
7. Slide wine rack back into position.










