Manualshelf

User Guide & Service Manual

ManualsBrandsU-Line ManualsWine CoolersU-Line 36 Inch Wide 123 Can Capacity Beverage Center with 79 12 Oz. Bottle Capacity, Wine Racks and U-Select Controls
31323334353637383940
USER GUIDE
Wine Rack Installation 1
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Wine Rack Installation
To remove wine racks for cleaning:
1. Remove any bottles stored on the rack.
2. Grasp the end of the rack and gently slide it out until it
stops.
3. The release levers are located on the inside of the rack
rails. Press the left rack release lever down. At the
same time, lift the matching right rack release lever
up. Pull the rack out until it is free of the tracks and
the cabinet.
NOTICE
Do not remove the track rails from the cabinet.
To insert wine racks in the cabinet:
1. Align the left and right rack channels with the tracks in
the cabinet. Ensure an even track engagement on both
sides by gently pushing the rack into the cabinet until
it stops.
2. Before reloading the rack, ensure proper movement of
the travel stops in the left and right track rails by
pulling the rack out gently until it stops.
To clean wine racks:
1. Saturate a soft cloth with a soapy, warm water
solution.
2. Wring excess water from cloth and wipe racks down.
NOTICE
The wine racks are greased. This white lithium
grease helps provide smooth operation of the
slide mechanism. It is important not to remove
grease.