Owner's Manual

USER GUIDE

Cleaning

u-line.com

9. When water begins flowing over the evaporator

(approximately 3 minutes), pour 1 packet of CLR

cleaner into the water trough. The cleaning process will

last approximately 45 minutes.

10.Dilute 1 tablespoon bleach in 1 gallon of warm water.

Apply this solution to the entire inside of the storage

area. Then rinse thoroughly with water.

The unit will resume operation approximately 15 minutes

after the automated cleaning process is completed. The

water fill valve will energize, fill the water reservoir, and

shut-off after three minutes. The compressor begins to

operate and water flows over the evaporator assembly (ice

mold). Initially, the water flow may not be uniform,

causing uneven sized cubes or water to spill into the ice

storage bin. This is a normal situation that will correct

itself within the first 24 hours of operation.

NOTICE

Discard all ice produced in the first harvest.

Should power to the unit be interrupted during

the self-clean cycle, it will be necessary to

repeat the complete cleaning cycle after power

is restored.

REFRESH KIT

Due to variations in water quality or inadequate

maintenance your unit may become excessively coated in

lime scale or calcium. U-Line offers a cost effective

refresh kit which replaces many interior components and

will return your unit to like new condition. Refresh kits

may be ordered from your local distributor and installed

by your local service company. For information on your

local distributor or service company please visit