Quick Start Guide
QUICK START GUIDE
7
u-line.com
2200 SERIES ZWC
Up Down Light Power
Auxiliary
LED
CONTROL FUNCTION GUIDE
FUNCTION COMMAND DISPLAY/OPTIONS
ON/OFF Press   and release  Unit will immediately turn ON or OFF.
Toggle lights Press   and release  Leave interior light on for 3 hours.
Adjust temperature
Press   and release 
The zone you are setting will have its light turned on 
(top zone first).
Press   to adjust set point 
temperature
Display will show the set temperature.
Press    to change zones Light will switch from top zone to the bottom zone.
Press   to adjust set point 
temperature
Display will show the set temperature.
Press    to confirm and exit
View temperature in unit Press   together and release 
The display will flash and then toggle from set point 
to temperature in unit. The temperature shown will 
correspond to the illuminated zone.
Toggle between F/C Hold   for 5 seconds The display will change units.
or
or
or
and
and
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• An audible tone will sound for several seconds every minute.
• “dr” will appear in display.
Close door to silence alert and reset.










