User Guide & Service Manual

USER GUIDE

Replace Ice Maker 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Replace Ice Maker

1. Unplug unit.

2. Disconnect ice maker wire harness at plug.

3. Disconnect thermistor plug.

4. Remove water inlet tube.

5. Remove front cover.

6. Advance ejector blade to the 3 o’clock position by

turning the 5/16" hex head on the small brass gear

counterclockwise.

7. Remove three screws from wall of freezer housing.

8. Remove ice maker assembly.

9. Install new ice maker assembly.

10.Reconnect plug.

11.Reconnect thermistor plug.

12.Insert water inlet tube.

13.Apply Permagum

to all exit holes.

14.Install back panel.

15.Plug in unit and test.

Front cover

Freezer housingSmall brass gear

hex head

Wire harness

Freezer housing

screws

ULIN_0373_A