Quick Start Guide
QUICK START GUIDE
u-line.com
10
QUICK START GUIDE
10
u-line.com
13.Be sure the screws force their way past the opening on 
the gasket channel and sit flush against the bottom of 
the channel.
14.Remove clamps from door/drawer.
If panel requires additional adjustment after 
removing clamps, slightly loosen each screw and 
adjust panel as necessary. Tighten screws upon 
completion.
Starting at the corners, re-install the gasket into the 
gasket channel in the frame. Make sure the gasket is fully 
seated. This may take some force.
Integrated Panel
Integrated Panel










