Service manual

Service and Parts Manual

Compressor Pins

To measure start winding resistance, measure across the C - S pins.

To measure run winding resistance, measure across the C - R pins. These pins should

never measure any resistance to ground. This would indicate a shorted compressor.

Specifications:

FF7.5HBK Compressor Start Winding 12.0 OHMS

FF7.5HBK Compressor Run Winding 2.9 OHMS

CLR60 Water Valve Coil Resistance 280 OHMS

Bypass Coil Resistance 380 OHMS

Pump Motor Winding Resistance 71.5 OHMS

UL303

STARTING

RELAY

3/4" OVERLOAD

PROTECTION

ELECTRICAL SPECIFICATIONS