Use & Care Manual

CLR2160, CLRCO2175 27
Electronic Control Quick Guide
NOTE: 38°F is an example; the display will vary with actual set-point.
IMPORTANT
Factory recommended set-point is 38°F for refrigerators and beverage centers, and 50°F for wine coolers.
All Models
Task Touch Touch Display Comment
Turn ON/OFF Hold 10 seconds Release when °F flashes. or
Adjust
Temperature
or
Touch and release
or
Touch to change temperature
°F flashes after first touch,
set-point saved after 5
seconds of inactivity and °F
stops flashing.*
View Actual
Temperature
Hold 5 seconds Release when °F flashes.
For Wine Coolers, see Use
and Care Manual.
Change °F-°C Hold or Repeat to switch back.
Blackout
Mode
Hold 10 seconds
Display (and cabinet light) not
operable in Blackout Mode.
Hold light for 10 seconds to
exit.
* Drawer Wine Cooler: Initially, top bar will flash to set to zone. After five seconds of inactivity (or touching light button), the bottom
zone (bottom bar on F flashing) can be adjusted. After five seconds of inactivity, set-point will be stored in unit.
Glass Door Models
Task Touch Touch Display Comment
Cabinet Light
Light normally goes on/off
with door opening. Pressing
light button will turn
interior light on for 4 hours,
then it will turn off.
Display Off
Mode
Hold
Display off when door is
closed (unless cabinet light is
switched on). Repeat to
switch back.
All Ice Makers
Task Touch Touch Display Comment
Ice Maker Off
Mode
Hold Repeat to switch back
Clear Ice & Clear Combo Only
Task Touch Touch Display Comment
Clean Cycle Hold
Will automatically return to
ice production when clean
cycle is complete.
Ice Thickness
Adjustment
Hold Use warmer/colder to scroll.
Temporary
Shutdown
(Office Mode)
Hold
Ice maker will automatically
turn back on in three hours.
ULIN_30096_5-7-07.fm Page 27 Friday, May 11, 2007 11:06 AM