Installation guide

www.U-LineService.com 6 05/2007
CLR2160/CLRCO2175 Ice Makers
Cut-Out Dimensions CLRCO2175
Follow the cut-out drawing in Figure 4. The 24-3/16"
width allows 1/4" for ease in installation and removal of
the unit. The 24" depth is the cabinet depth in most
installations. The unit is 24" deep including the handle
on Black and White models and 24" deep including the
door and not the handle on Stainless Steel models (see
Figure 5).
IMPORTANT
If you would like to align the face of the unit with other
adjacent cabinet doors in certain installations, you may
need to alter the wall just behind the drain connection on
the unit to accommodate the drain. The actual amount of
alteration will be determined by your actual drain
connection components.
Product Dimensions CLRCO2175
Please note that the unit has adjustable feet that can add
one additional inch to height during leveling or to match
adjacent cabinets (see Figure 50 on Page 21).
Door Swing/Clearances Information
CLRCO2175
Black and White units have a zero clearance for the door
to open 90° (see Figure 6). Stainless Steel models require
a minimum of 2-1/8" door clearance to accommodate the
handle if the unit is installed next to a wall or similar type
of structure.
See Electrical
Specifications
for Power Supply
34-1/4"
to
35-1/8"
24-3/16"
8"
24"
Figure 4
24"
Including
Handle
34-1/8"
23-15/16"
Black and White Stainless Steel
34-1/8"
23-15/16"
26-1/8"
Including
Handle
Figure 5
1/4" Min.
Wall Wall
2-1/8" Min.
90°
Door Swing
Black and White
Stainless Steel
90°
Door Swing
21-3/4"
25-1/2"
21-3/4"
25-1/2"
Figure 6