Installation guide

05/2007 3 www.U-LineService.com
CLR2160/CLRCO2175 Ice Makers
General Precautions
Use this appliance for its intended purpose only and
follow these general precautions along with those listed
throughout this guide:
WARNING
SHOCK HAZARD — Electrical Grounding Required.
• Keep the unit unplugged throughout installation
except during testing.
• Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.
• Never use an extension cord to connect power to
the unit.
• Always keep your working area dry.
CAUTION
• Use care when moving and handling the unit. Use
gloves to prevent personal injury from sharp edges.
• Do not lift the unit by the door or door handle.
• Do not install the unit behind closed doors or in any
way that would obstruct airflow to the front grille,
which may cause the unit to malfunction.
You have received a carton containing your CLR2160 Ice
Maker or CLRCO2175 Clear Ice Maker/Refrigerator with
a package inside containing a Use and Care Guide, a
Drain and Water Installation Instruction sheet, a Product
Registration Card and water connection parts. Complete
and mail the Product Registration Card or register
online at www.U-LineService.com. Once your unit is
installed, keep the Use and Care Guide and this
Installation Guide in a safe place for future reference.
Your unit is Black, White or Stainless Steel. Black and
White units have a reversible door with a slightly
contoured handle across the top. They come with a flush
mounted door panel that, when removed, will accept a
custom 1/4-inch thick door panel or a 3/4-inch thick full
overlay door panel. Stainless Steel units are covered with
a protective coating and have been ordered left- or right-
hand hinged. The Stainless doors are not reversible and
do not accept custom panels. CLR2160 Ice Makers/
CLRCO2175 Clear Ice Maker/Refrigerators may be ordered
with or without a factory-installed drain pump. Please
carefully follow the directions that apply to your unit and
your intended design.
Tools/Materials Required
• Screwdrivers — slotted and Phillips head
• 1/4” Nut driver (optional)
• Slide cutter
• Copper tubing cutter
• 12” Level
• 9/16” Open end wrench
• 7/16” Open end wrench
• Pliers
• (1) Brass garden hose fitting (supplied with product)
• (10’ or more depending on water supply location) 1/4”
O.D. soft copper tubing
• *(10’ or more depending on drain location) 5/8” I.D. braid
reinforced PVC drain tubing
• *(3) 11/16” to 1 1/4” Clamp range worm drive hose clamps
• *(1) Nylon barbed coupling for 5/8” I.D. hose
• *(1) 5/8” to 7/8” adapter (optional)
• P60 Drain Pump (if required and not already factory
installed, see Page 17)
• 1/4-inch thick door panel material and cutting tools
(Black or White units) (If installing a 1/4”Panel)
• Full Overlay Door Panel Kit (part number U-OL2175B —
Black or part number U-OL2175W — White), 3/4-inch door
panel overlay, cutting tools, drill and bits (Black or White
units) (If installing a 3/4” Full Overlay)
Note: Items with an “*” in front of them can be purchased
in a kit from your dealer. Order U-Line Part No.
U-CLRDRAINKIT and this kit will contain all these items.
These items are only sold as a kit, each item is not sold
seperately.
2 Inspect and Plan