user guide_and_manual

ManualsBrandsU-Line ManualsIce MakersU-Line® 1000 Series 14.94" Stainless Steel Ice Maker-CLR1215S-40B

USER GUIDE

Drain Pump 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Drain Pump

NOTICE

PLEASE READ this instruction completely before

attempting to install or operate the unit.

Improper hook-up can result in substantial

property damage! If you are unsure of your

ability to safely connect the drain pump to the

unit, consult a licensed plumber for assistance.

Use these instructions to install the U-Line P60-

00 drain pump in the U-Line Clear Ice Machine

(unit). The drain pump should be installed

before installing the unit.

• The U-Line P60-00 drain pump is designed to be used

exclusively on the U-Line Clear Ice Machine and is UL

recognized only for use on the U-Line Clear Ice

Machine.

• U-Line Corporation assumes no warranties or

responsibility, whether express or implied, if the P60-00

drain pump is used on another ice machine or product

for which it is not UL recognized or listed.

• Modification of the P60-00 drain pump will void all

warranties.

NOTICE

Keep your proof of purchase for warranty

purposes.

INCLUDED IN KIT:

1. 1x S-shaped Drain Tube

(Not used)

2. 1x Straight Drain Tube

3. 1x Vent Tube

4. 1x Braided Discharge Tube

(Not included in pump kit.

Ice Machine ships with

discharge tube installed.)

5. 2x Vent tube Zip Ties

6. 2x Small Worm Gear

Clamps

7. 1x Large Worm Gear

Clamp

8. 1x P60 Pump

9. 1x Discharge Tub

(Used on older models only)

TOOLS REQUIRED:

• 1/4" x 6" Blade Screwdriver

•Adjustable Pliers

•1/4" Nut Drive