Technical data

34 Chapter 2 Answer calls
P0937240 02
Figure 6 CAP module with M7324 and M7324N telephones
Customize your CAP module
When a CAP module is first plugged into your telephone, some of the module buttons are
automatically programmed to dial an internal number. You can program any of the buttons on your
CAP module that do not select lines to dial internal or external numbers automatically.
If your installer has programmed the CAP module for your system, you can move external lines to
the CAP module by using
≤•°⁄. See “Move line buttons” on page 90.
You can program features on CAP module buttons. See Chapter 4, “Time-saving features,” on
page 49 and Chapter 9, “Customize your telephone,” on page 83 for information about
programming memory buttons. You cannot assign any buttons on a CAP module as answer
buttons.
Monitor telephones with the CAP module
The indicators Ω next to internal autodial buttons on your CAP module show the status of the
telephones in your system.
CAPN Module
M7324N telephone
M7324 telephone
CAP Module