User Guide & Service Guide

USER GUIDE

Interior Shelves 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Interior Shelves

WIRE SHELF REMOVAL AND INSTALLATION

For ADA models equipped with wire racks, reposition the

shelves as follows:

1. Remove shelf retention clip.

2. Pull shelf out about 6" (1), until back of shelf clears the

“hump” on the right-hand side.

3. Tilt up right-hand edge of shelf (2).

4. Remove shelf from unit by pulling out (3).

Insert the shelves as follows:

1. To move to a different position in the unit, insert shelf

at an angle, approximately 15-20°, over the rib in the

side of the unit where you want to place the shelf. The

shelf must be started into the unit at an angle to clear

the door.

2. Continue to slide the shelf into the unit at an angle

until it clears the door.

3. Lower the shelf and push it in completely.

4. Install shelf retention clip.