QUICK START GUIDE Ice Makers • 115 V / 60 Hz & 220-240 V / 50 Hz
QUICK START GUIDE u-line.com WELCOME TO U-LINE Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine use.
QUICK START GUIDE Contents 1 Model List 3 Safety and Warning 4 Environmental Requirements 5 Electrical 6 Water Hookup 9 Door Swing 10 Door Latch 11 General Installation 12 Integrated Panel Installation 14 First Use 14 Ice 15 Warranty u-line.
QUICK START GUIDE u-line.com Model List This guide provides the basics to get you started. Looking for more information? Visit u-line.com to view detailed User Guides for all U-Line products.
QUICK START GUIDE u-line.com Marine Series ULN-BI95FCB-03A ULN-WH95FC-03A ULN-SS1095FC-03A ULN-BI95FCB-20A ULN-WH95FC-20A ULN-SS1095FC-20A ULN-SS1095FD-03A ULN-SS1095FD-20A ULN-SS1095NF-03A ULN-SS1095NF-20A ULN-SP18FCS-03A ULN-SS98NF-03A ULN-SP18FCS-20A ULN-SS98N5-20A ULN-SP18FCB-03A ULN-SP18FCB-20A ULN-SP18FCW-03A ULN-SP18FCW-20A Visit http://www.u-line.com/product-literature/userguides or scan this QR code to view all user guides online.
QUICK START GUIDE u-line.com Safety and Warning that they do not play with this appliance. Cleaning and NOTICE without supervision. user maintenance shall not be performed by children PLEASE READ all instructions before installing, operating, or servicing the appliance. SAFETY ALERT DEFINITIONS Throughout this guide are safety items labeled with a ! DANGER Do not use electrical appliances inside the food storage compartment of this appliance.
QUICK START GUIDE ! CAUTION Use care when moving and handling the unit. Use gloves to prevent personal injury from sharp edges. If your model requires defrosting, DO NOT use medical devices or other means to accelerate the u-line.com This appliance is intended to be used in household and similar applications such as: • Staff kitchen areas in shops, office and other working environments. • Farm houses and by clients in hotels, motels and other residential type environments. defrosting process.
QUICK START GUIDE 220-240 V UNITS This model is intended for indoor/interior applications only and is not to be used in installations that are open/ exposed to natural elements. This unit is designed to operate between 50°F (10°C) and u-line.com ! CAUTION Damages caused by ambient temperatures of 40°F (4°C) or below are not covered by the warranty. 90°F (32°C). Higher ambient temperatures may reduce the unit’s ability to reach low temperatures and/or reduce ice production on applicable models.
QUICK START GUIDE u-line.com The unit requires a grounded and polarized 115 VAC, The unit requires a grounded and polarized 230 VAC, 60 Hz, 15A power supply (normal household current). An 50 Hz, 8A power supply (normal household current). An individual, properly grounded branch circuit or circuit individual, properly grounded branch circuit or circuit breaker is recommended. A GFCI (ground fault circuit breaker is recommended.
QUICK START GUIDE • The water line MUST have a shut-off valve in the supply line. • The water line should be looped into 2 coils. This will allow the unit to be removed for cleaning and servicing. u-line.com 1. Turn off water supply and disconnect electrical supply to product prior to attempting installation. 2. Remove the grille (plinth strip/base fascia) and access panel (if equipped) along with back panel. Make certain that the tubing is not pinched or damaged during installation. 3.
QUICK START GUIDE 6. Turn on water supply and check for leaks. u-line.com Water Supply Connection When connecting the water supply, please note the 7. Reinstall the grille (plinth strip/base fascia) and access following: panel (if equipped) along with the back panel. • Before installing the unit and connecting to the cold 8. Install retaining clip. water supply, review the local plumbing codes. • The water pressure should be between 20 and 120 psi (138 and 827 kPa).
QUICK START GUIDE u-line.com 7. Turn on water supply and check for leaks. ! CAUTION Turn off water supply and disconnect electrical 8. Reinstall back panel. supply to unit prior to installation. 9. Install retaining clip. Use caution when handling back panel. The edges could be sharp. 1. Turn off water supply and disconnect electrical supply to product prior to attempting installation. 2. Remove the back panel. 3. Locate water valve inlet. Door Swing 1200 SERIES Wall Wall 1/4" Min. (6 mm) 4.
QUICK START GUIDE Stainless Steel and black and white models require 2-1/8" (54 mm) door clearance to accommodate the handle if u-line.com Door Latch MARINE MODELS installed next to a wall. The door latch assembly included with your unit can be Integrated models require 1/4" (6 mm) clearance if installed next to a wall. Allow for additional space for any installed to prevent the door from opening when the vehicle is in motion. knobs or pulls installed on the integrated panel/frame.
QUICK START GUIDE General Installation MARINE AND BI SERIES LEVELING INFORMATION NOTICE u-line.com 1200 SERIES LEVELING INFORMATION 1. Use a level to confirm the unit is level. Level should Because these units do not have leveling legs, it is extremely important that they sit on a level surface. If they are not level, the ice mold will be placed along top edge and side edge as shown. not fill evenly. 1 Use a level to confirm the unit is level.
QUICK START GUIDE INSTALLATION 1. Plug in the power/electrical cord. u-line.com 2. Pull door gasket out of groove (top edge of door only). Start in the middle and pull outward, 2. Gently push the unit into position. Be careful not to kink the water supply line or entangle the cord. moving toward the edge. This may take some force. 3. Re-check the leveling, from front to back and side to side. Make any necessary adjustments.
QUICK START GUIDE u-line.com CRESCENT ICE MAKERS AND ADA15IM Due to differences in floor construction or 1. Fully open door/drawer. surrounding cabinetry, the panel may not sit flush with the top of the door/drawer. 2. Starting at corner, pull gasket away from door/ Panel Door drawer. 3. Continue to pull gasket free from gasket channel. 9. Secure integrated panel to door/drawer 4. Upon removal, lay gasket Bar Clamp using clamps. A down on a flat surface. robust tape may also 5.
QUICK START GUIDE 13.Be sure the screws force their way past the opening on the gasket channel and sit flush against the bottom of u-line.com Ice ICE MAKER OPERATION the channel. When the ice bucket is full, the ice making mechanism will shut off. However, the refrigeration system will continue to cool and maintain the ice supply. Integrated Panel Integrated Panel NOTICE Do not place cans or bottles in the ice 14.Remove clamps from door/drawer. compartment because they will freeze.
QUICK START GUIDE During periods of limited use or high ambient u-line.com 3. The warranty listed above does not apply to floor temperatures, it is common for cubes to fuse together. display models. The warranty for these models shall be Gently shake the bucket to break apart cubes. If not using one year from the date of installation. This one-year the ice maker regularly, empty the ice bucket periodically warranty does not apply to cosmetic damages. A proof to ensure fresh cubes.
QUICK START GUIDE u-line.com 7. If any applicable national law provides for a minimum mandatory warranty period that is longer than the aforementioned period of two years from the date of purchase, such longer period shall apply. 8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE DISCLAIMED.
