Thomco Job # 3064 RECORD OF CONTRACTOR SUBMITTAL TO: So Cal Gas Co. 1801 S. Atlantic Blvd., Monterey Park, CA 91754 ATTN / C/O: Submittal #: 114530-01 Date: 10/14/14 Tom Souders, So Cal Gas Co. PROJECT: Monterey Park Learning Center PRIORITY: URGENT NORMAL FOR: INFORMATION ONLY AS REQUESTED REFERENCE YOUR FILES SUBMITTALS FOR APPROVAL RESPONSE REQUIRED SENT BY: No.
48" Built-In Side-by-Side subzero.com FEATURES • Four design options: framed, overlay, flush inset and stainless steel. • Dual refrigeration system ensures the freshest food and energy efficiency. • Electronic microprocessor constantly monitors entire unit to ensure proper food storage environment. • Air purification system reduces odors, bacteria, viruses and ethylene gas. • Advanced water filtration system. • Illuminated touch control panel.
48" Built-In Side-by-Side subzero.com DIMENSIONS SPECIFICATIONS PRODUCT Dimensions Door Clearance Weight ELECTRICAL 26 3/16" (665) 48" (1219) 48"W x 84"H x 24"D 30 1/2" 630 lb 7" E (178) 6" CAPACITY (152) Refrigerator Freezer 19.1 cu ft 9.
36" Built-In All Refrigerator with Glass Door subzero.com FEATURES • Four design options: framed, overlay, flush inset and stainless steel. • Triple-pane, UV-resistant glass door— high altitude glass available. • Electronic microprocessor constantly monitors entire unit to ensure proper food storage environment. • Air purification system reduces odors, bacteria, viruses and ethylene gas. • Illuminated touch control panel. • Bright interior lighting throughout, including storage drawer area.
36" Built-In All Refrigerator with Glass Door subzero.com DIMENSIONS SPECIFICATIONS PRODUCT Dimensions Door Clearance Weight ELECTRICAL 26 3/16" (665) 36" (914) 36"W x 84"H x 24"D 37 3/4" 430 lb 7" E (178) 6" CAPACITY (152) Refrigerator 23.4 cu ft 84" ELECTRICAL Supply Service 75 1/2" (1918) FROM FLOOR (2134) 73 3/4" 115 VAC, 60 Hz 15 amp circuit RIGHT SIDE OF OPENING (1873) Specifications are subject to change without notice. Visit subzero.
D5634XLHS/TH Tubular handle Features PROGRAMS Heavy wash Delicate wash Quick wash Super quick Eco wash Rinse and dry Rinse and hold OPTIONS Product overview Product:Dishwasher Size:XL Mode of installation:Built-in Energy class:A++ Product:Built-in dishwasher Dimensions of the product (W×H×D):24” × 32 1/4” × 22 7/8” (610 × 819 × 581 mm) Delayed start: 24 h High temperature Long dry CLEANING SYSTEMS Self cleaning filters AquaLevel™ Sensor DRYING SYSTEM Specifications Turbo Drying™ GENERAL COMFORT/EA
DISHWASHER INSTALLATION INSTRUCTIONS T!tions before installing N A T R O IMP f these instruc ll o Read a washer. h is d the AUTOMATIC HIGH LOOP The drain hose is fastened to the back of the machine at the best height. To eliminate potential drain problems, leave this hose in place.
Introduction Read these instructions carefully and completely before you install the machine. The installation should be carried out by a qualified person who is familiar with all local codes and ordinances for electrical and plumbing connections. has to be done before you move the machine into place.
XXL DISHWASHERS D5434XXL W/B/S, D5624XXLS, D5634XXLHS, D5654XXLHS, D5894XXLHS, D5894AXXLHS UNIT DIMENSIONS U.S. Metric Technical Data Height (Adjustable)* 34-3/8˝ to 36-1/2˝ 873 mm to 927 mm Electricity 120V, 60Hz, 15 amp Width 24˝ 610 mm Water pressure Depth (Includes high loop) 22-7/8˝ 581 mm DepthW/handle 24-7/8˝ (D5634XXLHS, D5654XXLHS, D5894XXLHS) 632 mm 4.2 - 140 psi, 0.03-1.0 MPa, 0.
ADA AND XL DISHWASHERS D5424ADA W/B/S, D5634ADAHS, D5424XL W/B/S, D5624XLCS, D5434XL W/B/S, D5454XL S, D5634XLHS, D5638XLHS, D5644XLCS UNIT DIMENSIONS U.S. Metric Technical Data Height (Adjustable)* 32-1/4˝ to 34˝ 819 mm to 864 mm Electricity 120V, 60Hz, 15 amp Width 24˝ 610 mm Water pressure Depth (Includes high loop) 22-7/8˝ 581 mm DepthW/handle (D5634ADAHS, D5624XLCS, D5634XLHS, D5638XLHS, D5644XLCS) 24-7/8˝ 632 mm 4.2 - 140 psi, 0.03-1.0 MPa, 0.
CORNER INSTALLATION If the dishwasher is installed in a corner, there must be a minimum clearance of 2˝ (50 mm) from the side wall so the door can open. 2˝ clearance EASYINSTALL CONNECTIONS PEX tubing with 3/8˝ compression fitting PEX tubing has a 95-year spec life. Fits American dishwasher water supply valves. Be sure to install the O-Ring which is attached to the PEX tubing in a plastic bag. Drain hose boot Ready to be cut to desired drain connection. Only one clamp required.
WATER SUPPLY WARNING! Plumbing connections must comply with applicable sanitary, safety and plumbing codes in your area. The machine can be connected to either a hot (max. 160 °F, 70 °C) or cold water supply. We recommend a cold water supply. The water pressure should be 4.2-140 psi. WARNING! In order to prevent heat damage to the inlet valve, all solder connections must be made before the water line is connected to the dishwasher. Connect to cold water...
DRAIN CONNECTIONS ASKO provides a 7/8˝ (22 mm) diameter corrugated drain hose which is connected to the back of the unit to form a high loop. NOTE: Do not use any fittings anywhere in the drain line that are less than 7/8˝ (22 mm) OD. THREE WAYS TO INSTALL DRAIN CONNECTIONS A) Typical connection to sink plumbing before trap (high loop drain) The access hole for the drain line should be 1-5/8˝ (41 mm)2˝ (50mm) max.
ELECTRICAL connections WARNING! Before working on wiring for any electrical appliance, be sure the electrical power has been turned off at the breaker/fuse box. WARNING! Do not use an extension cord for this appliance. WARNING! Disconnect the electrical power supply and place a tag at the disconnect switch indicating that you are working on the circuit.
PREPARING THE DISHWASHER FOR INSTALLATION At this point the styrofoam, plastic wrap, and the wood pallet (base) should be removed from the dishwasher. Now is an excellent time to inspect for any shipping damage. Should you find any damage, you should report it to your dealer or builder immediately. Be sure to remove the toe kick and toe kick insulation (only on certain models) from the top of the dishwasher. Attach the supplied door sealing (Only certain models.
Moving the machine into place Rear foot Front feet 1˝ (24 mm) 1˝ (24 mm) Adjusting machines with three or four feet Adjusting machines with FRONT ADJUSTABLE REAR Foot 1. Position the machine in front of the cabinet opening. 1. Position the machine in front of the cabinet opening. 2. Push the plastic feet into place on all steel feet (included in document bag). (Only certain models.) 2. Push the plastic feet into place on all steel feet (included in document bag). (Only certain models.) 3.
CONNECTING THE ELECTRIC CABLE If the cord is not long enough, or if a hard-wire installation is needed, follow the steps below to complete the electrical connection. 4. Connect ground wire to ground connection screw on the bottom. WARNING! Before starting this procedure, be sure the power is turned off at the breaker/fuse box. 1. Connect supply cable with a UL-listed strain relief bushing (if nonmetallic cable is to be used). 2. Connect branch circuit white lead to N lead on filter. 3.
FastenING the dishwasher to the cabinet It’s necessary to fasten the dishwasher to the cabinet so it won’t tilt when the door is opened or if something heavy is placed on the door. Use only the stainless steel screws provided with the machine. 1. 1 2. 4x / 3x Use option A for U.S. or European standard installations. Use option 3 B only for European standard installations, or U.S. installations 2 where there is a hard counter-top such as tile or marble.
INSTALLING THE TOE KICK type A ? 8 9 Insulation material Insulation material 1. 1. 2. The toe kick is attached with two screws that can only be adjusted vertically. 2. 3. The toe kick is attached with two screws that can only be adjusted vertically. NOTE: or NOTE: or Customer Care Center 1-800-898-1879 www.askona.com 461328 Install DW90 USA EN Rev 01.
INSTALLING THE TOE KICK type B ? 8 9 Insulation material Insulation material 1. 1. 2. 2. 3. Page 14 461328 Install DW90 USA EN Rev 01.indd 14 Customer Care Center 1-800-898-1879 www.askona.
INSTALLING THE TOE KICK 4. 5. x x 6. Customer Care Center 1-800-898-1879 www.askona.com 461328 Install DW90 USA EN Rev 01.
INSTALLATION CHECKLIST Asko - Dishwasher Appliance Installation Checklist • Remove packaging and check for cosmetic damages. • Remove the information packets from inside the dishwasher. • Attach any accessories as required by the installation. Fill strips, light shielding film, supplied door sealing... • Attach the drain line using the largest section of the disposer boot allowable. Leave the high loop in place. • Attach the PEX fill hose. Don’t forget to use the O-ring.
PEB7226SF/EH GE Profile™ Series 2.2 Cu. Ft. Countertop Microwave Oven Dimensions and Installation Information (in inches) Exterior Dimensions (in inches) WxHxD 25-1/2" ± 1/8" 24-1/8 x 14 x 19-3/4 Optional Accessory Trim Kits for GE Microwave Ovens (Available at additional cost) For a custom built-in appearance, these kits allow built-in installation of the countertop microwave oven into a wall or cabinet alone and are U.L. approved for installation over a GE single electric wall oven.
PEB7226SF/EH GE Profile™ Series 2.2 Cu. Ft. Countertop Microwave Oven Features and Benefits • 2.2 cu. ft.
1A0D7A5 1W 5 1CMS ADA151M Stainless Black ADA S e ri e s PERFORMANCE • Daily ice rate of up to 25 lbs of crescent ice • Stores up to 25 lbs of ice • Uses less than 3 gallons of water to produce 25 lbs of ice, conserving both energy and water • Uses less energy than a 75 watt light bulb • Perfect size crescent ice cubes (1/2"W x 3/4"H x 2-1/2"L) • Mechanical control monitors ice making operation to ensure maximum daily ice production • Manual defrost • UL residential and commercial listings Interior /
7 51 B V A1D0 A 5 1E M 23"* 32" 15" *Add 3/4” To Depth For Water Line Clearance 23"* 23-3/4" Minimum 32" to 33" 4" 1-3/4"* W E 32" 3-9/16"* 1-7/8"* 15-1/4" *Can Vary Up To +1” Depending On Height Of Leveler Legs Legend: E - Electrical W - Water 15" *Add 3/4” To Stainless Depth For Water Line Clearance ADA151MS Model and ADA151MB Black Model * Add 3/4" for water line clearance DIMENSIONS AND SPECIFICATIONS ICE MAKERS Overall Dimensions ADA15IM Height Width Depth – black model With stainless