Installation guide

12 u-line.com
3018/3024 Top Mount
Top mount configurations work well with fully secured wood or
laminate countertops.
1. Align the bracket on top of your unit as shown above. The
bracket must be used to ensure a secure mount.
2. Using 2 of the supplied 10 #8 5/8" screws, install screws into the
plate using a #2 Phillips head screwdriver.
3. Completely slide the unit into its position in the cabinet. Be
certain unit height is properly adjusted. (See Leveling
Information on page
13 )
4. Open door completely. Make certain door clears surrounding
cabinetry.
5. Using a 3/32" drill bit, drill 3 pilot holes, 5/8" deep into bottom
of counter top. Use the anti-tip bracket as a template.
The 3 remaining cabinet side mounting screws will be installed
later in this guide.
3018/3024 Side Mount
Side mount configurations work well if you have a granite
countertop or do not wish to mount the bracket to the underside
of your countertop.
1. Align the bracket to the hinge side of the unit as shown above.
2. Using 2 of the supplied 10 #8 5/8" screws, install screws into the
anti-tip bracket, mounting the bracket to your unit.
3. Completely slide the unit into its position in the opening. Be
certain unit height is properly adjusted. (See Leveling
Information on page
13 )
4. Open door completely to gain access to the anti-tip bracket.
Make certain door clears surrounding cabinetry.
5. Using a 3/32" drill bit, drill 3 pilot holes, 5/8" deep into cabinetry
frame using the anti-tip bracket as a template.
The 3 remaining cabinet side mounting screws will be installed later
in this guide.
Left View Of Cabinet
Right View Of Cabinet