Installation guide

u-line.com 11
Anti-Tip Brackets Installation
CAUTION
!
The anti-tip bracket must be installed to prevent the unit
from tipping when doors are fully opened, or excess
weight is placed on the front of the unit.
The anti-tip brackets have multiple mounting options. Mounting
will depend on your particular cabinet configuration. Follow the
instructions below to secure the anti-tip plate(s) to the unit.
Locate your two anti-tip brackets and 10 #8 x 5/8" screws included
with your unit.
3036 Top Mount
Top mount configurations work well with fully secured wood or
laminate countertops.
1. Align the brackets on top of your unit as shown below. Both
brackets must be used to ensure a secure mount.
2. Using 4 of the supplied 10 #8 5/8" screws, install 2 screws into
each plate using a #2 Phillips head screwdriver.
3. Completely slide the unit into its position in the opening. Be
certain unit height is properly adjusted. (See Leveling
Information on page
13 )
4. Open both doors completely. Make certain doors clear
surrounding cabinetry.
5. Using a 3/32" drill bit, drill 6 pilot holes, 3 for each bracket, 5/8"
deep into bottom of counter top. Use the anti-tip brackets as a
template.
The 6 remaining cabinet side mounting screws will be installed
later in this guide.
3036 Side Mount
Side mount configurations work well if you have a granite
countertop or do not wish to mount the brackets to the underside
of your countertop.
1. Align each bracket to the side mounting holes on the hinge side
of your model as shown below.
2. Using 4 of the supplied 10 #8 5/8" screws, install 2 screws into
each anti-tip bracket, mounting the bracket to your unit.
3. Completely slide the unit into its position in the opening. Be
certain unit height is properly adjusted. (See Leveling
Information on page
13 )
4. Open both doors completely to gain access to the anti-tip
brackets. Make certain doors clear surrounding cabinetry.
5. Using a 3/32" drill bit, drill 6 pilot holes, 3 for each bracket, 5/8"
deep into cabinetry frame using the anti-tip brackets as a
template.
The 6 remaining cabinet side mounting screws will be installed
later in this guide.
8 3000 Series Anti-Tip Bracket
Left View Of Cabinet
Right View Of Cabinet