Installation guide

8 u-line.com
Panel Installation
1. Fully open door.
2. Starting at corner, pull gasket
away from door.
3. Continue to pull gasket free
from gasket channel.
4. Upon removal, lay gasket
down on a flat surface.
NOTICE
If working with the door that houses the display, make
certain the display cable remains securely seated in the
inner door channel, see below.
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY PANEL FLAT AND WITHOUT
INTERFERENCE
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY FRAME FLAT AND WITHOUT
INTERFERENCE
23-3/8"
(594 mm)
3/4"
(19 mm)
Solid Overlay
30"
(762 mm)
2-3/4" MIN
(70 mm MIN)
Frame Overlay
3/4"
(19 mm)
3024 Models
23-3/8"
(594 mm)
30"
(762 mm)
Display
Cable
Inner Door
Channel