Integration Manual

SARA-R4/N4 series - System Integration Manual
UBX-16029218 - R11 Approvals Page 135 of 156
4.4 European Conformance CE mark
SARA-R410M-02B module product version has been evaluated against the essential requirements of the
Radio Equipment Directive 2014/53/EU.
In order to satisfy the essential requirements of the 2014/53/EU RED, the modules are compliant with the
following standards:
 Radio Spectrum Efficiency (Article 3.2):
o EN 301 908-1
o EN 301 908-13
 Electromagnetic Compatibility (Article 3.1b):
o EN 301 489-1
o EN 301 489-52
 Health and Safety (Article 3.1a)
o EN 62368-1
o EN 62311
⚠ Radiofrequency radiation exposure Information: this equipment complies with radiation exposure limits
prescribed for an uncontrolled environment for fixed and mobile use conditions. This equipment should
be installed and operated with a minimum distance of 20 cm between the radiator and the body of the
user or nearby persons. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter except as authorized in the certification of the product.
⚠ The gain of the system antenna(s) used for the SARA-R410M-02B modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the values stated
in the Declaration of Conformity of the modules, for mobile and fixed or mobile operating
configurations:
 8.2 dBi in 800 MHz, i.e. LTE FDD-20 band
 8.4 dBi in 900 MHz, i.e. LTE FDD-8 band
 11.3 dBi in 1800 MHz, i.e. LTE FDD-3 band
The conformity assessment procedure for SARA-R410M-02B module, referred to in Article 17 and detailed
in Annex II of Directive 2014/53/EU, has been followed.
Thus, the following marking is included in the product: