Integration Manual

SARA-R4/N4 series - System Integration Manual
UBX-16029218 - R11 Approvals Page 133 of 156
 For SARA-R410M and SARA-N410 modules: "Contains IC: 8595A-2AGQN4NNN"
 For SARA-R412M cellular modules: "Contains IC: 8595A-UBX18ZO01"
⚠ Innovation, Science and Economic Development Canada (ISED) Notices
This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B).
Operation is subject to the following two conditions:
 this device may not cause interference
 this device must accept any interference, including interference that may cause undesired operation
of the device
Radio Frequency (RF) Exposure Information
The radiated output power of the u-blox Cellular Module is below the Innovation, Science and Economic
Development Canada (ISED) radio frequency exposure limits. The u-blox Cellular Module should be used
in a manner such that the potential for human contact during normal operation is minimized.
This device has been evaluated and shown compliant with the IC RF Exposure limits under mobile
exposure conditions (antennas are greater than 20 cm from a person's body).
This device has been certified for use in Canada. Status of the listing in the Industry Canada’s REL (Radio
Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
⚠ IMPORTANT: Manufacturers of portable applications incorporating the SARA-R4/N4 series modules are
required to have their final product certified and apply for their own Industry Canada Certificate related
to the specific portable device. This is mandatory to meet the SAR requirements for portable devices.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
⚠ Avis d'Innovation, Sciences et Développement économique Canada (ISDE)
Cet appareil numérique de classe B est conforme aux normes canadiennes CAN ICES-3(B) / NMB-3(B).
Son fonctionnement est soumis aux deux conditions suivantes:
 cet appareil ne doit pas causer d'interférence
 cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son
fonctionnement
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans-fil u-blox Cellular Module est inférieure à la limite
d'exposition aux fréquences radio d'Innovation, Sciences et Développement économique Canada (ISDE).
Utilisez l’appareil de sans-fil u-blox Cellular Module de façon à minimiser les contacts humains lors du
fonctionnement normal.