Integration Manual

SARA-R4/N4 series - System Integration Manual
UBX-16029218 - R11 Approvals Page 132 of 156
 u-blox SARA-R412M cellular modules: 8595A-UBX18ZO01
4.3.1 Declaration of Conformity
This device complies with the ISED Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
 this device may not cause harmful interference
 this device must accept any interference received, including interference that may cause undesired
operation
⚠ Radiofrequency radiation exposure information: this equipment complies with the radiation exposure
limits prescribed for an uncontrolled environment for fixed and mobile use conditions. This equipment
should be installed and operated with a minimum distance of 20 cm between the radiator and the body
of the user or nearby persons. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter except as authorized in the certification of the product.
⚠ The gain of the system antenna(s) used for the SARA-R4/N4 series modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the value stated
in the ISED Canada Grant for mobile and fixed or mobile operating configurations:
 SARA-R410M-01B modules:
o 3.67 dBi in 700 MHz, i.e. LTE FDD-12 band
o 4.10 dBi in 850 MHz, i.e. LTE FDD-5 band
o 6.74 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 7.12 dBi in 1900 MHz, i.e. LTE FDD-2 band
 SARA-R410M-02B, SARA-R410M-52B and SARA-N410-02B modules:
o 3.66 dBi in 700 MHz, i.e. LTE FDD-12 band
o 3.94 dBi in 750 MHz, i.e. LTE FDD-13 band
o 4.41 dBi in 850 MHz, i.e. LTE FDD-5 band
o 6.75 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 7.00 dBi in 1900 MHz, i.e. LTE FDD-2 band
4.3.2 Modifications
ISED Canada requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by u-blox could void the user's authority to operate the equipment.
⚠ Manufacturers of mobile or fixed devices incorporating the SARA-R4/N4 series modules are authorized
to use the ISED Canada Certificates of the SARA-R4/N4 series modules for their own final products
according to the conditions referenced in the certificates.
⚠ The ISED Canada Label shall in the above case be visible from the outside, or the host device shall bear
a second label stating: