Integration Manual

TOBY-L2 and MPCI-L2 series - System Integration Manual
UBX-13004618 - R04 Advance Information Approvals
Page 127 of 141
4.2 Federal Communications Commission and Industry Canada notice
Federal Communications Commission (FCC) IDs:
 XPYTOBYL200
 XPYTOBYL210
Industry Canada (IC) Certification Numbers:
 8595A-TOBYL200
 8595A-TOBYL210
4.2.1 Safety warnings review the structure
 Equipment for building-in. The requirements for fire enclosure must be evaluated in the end product
 The clearance and creepage current distances required by the end product must be withheld when the
module is installed
 The cooling of the end product shall not negatively be influenced by the installation of the module
 Excessive sound pressure from earphones and headphones can cause hearing loss
 No natural rubbers, hygroscopic materials, or materials containing asbestos are employed
4.2.2 Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
 this device may not cause harmful interference
 this device must accept any interference received, including interference that may cause undesired operation
Radiofrequency radiation exposure Information: this equipment complies with FCC radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the body of the user or nearby persons. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter except as authorized
in the certification of the product.
The gain of the system antenna(s) used for the TOBY-L2 and MPCI-L2 series modules (i.e. the
combined transmission line, connector, cable losses and radiating element gain) must not
exceed 9.8 dBi (700 MHz), 4.3 dBi (850 MHz), 2.8 dBi (1900 MHz), 5.5 dBi (1700 MHz), 6.0 dBi
(2500 MHz), 6.30 dBi (900 MHz), 9.35 dBi (1800 MHz), 11.92 dBi (FDD1), 9.03 dBi (FDD8), for
mobile and fixed or mobile operating configurations.
4.2.3 Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not
expressly approved by u-blox could void the user's authority to operate the equipment.
Manufacturers of mobile or fixed devices incorporating the TOBY-L2 and MPCI-L2 series
modules are authorized to use the FCC Grants and Industry Canada Certificates of the TOBY-L2
and MPCI-L2 series modules for their own final products according to the conditions referenced
in the certificates.