Data Sheet

NINA-B40 series - Data sheet
UBX-19049405 - R04 Mechanical specifications Page 27 of 40
C1 - Public
5 Mechanical specifications
5.1 NINA-B400 mechanical specification
Figure 4 shows the mechanical outline of NINA-B400 modules. NINA-B400 modules have the same
footprint as the NINA-B406 outline, shown in Figure 5 and Figure 6.
Figure 4: NINA-B400 mechanical outline
Table 19 describes the mechanical outline of NINA-B400 modules.
Parameter Description Typical [mm] [mil] Tolerance [mm] [mil]
A Module PCB length 15.0 456.7 +0.20/–0.10 +7.9/–3.9
B Module PCB width 10.0 393.7 +0.20/–0.10 +7.9/–3.9
C Module thickness 2.23 87.8 +0.40/–0.20 +15.8/–7.9
C1 Module thickness at U.FL antenna connector 2.13 83.9 +0.40/–0.20 +15.8/–7.9
ccc Seating plane coplanarity 0.10 3.9 +0.02/–0.10 +0.8/–3.9
ZA3
Horizontal pin of U.FL antenna connector center to
left lower corner
1.40 55.1 ±0.20 ±7.9
ZA4
Vertical pin of U.FL antenna connector center to left
lower corner
5.00 196.8 ±0.20 ±7.9
Module weight [g] <1.0
Table 19: NINA-B400 mechanical outline data
A
B
CCC A
C
C1
ZA3
ZA4
Pin 1
Pin 1
A