Data Sheet

NINA-B41-data sheet
5Mechanical specifications
This chapter describes the mechanical specifications, including the mechanical outline and pin
dimensions, of the NINA-B410 and NINA-B416 module variants.
5.1NINA-B410 mechanical specification
Figure 4 shows the footprint for NINA-B410. NINA-B416 modules have the same compatible
footprint and pad dimensions, as shown in Figure 5 and Figure 6.
Figure 4: NINA-B410 mechanical outline
Parameter Description Typical [mm] [mil] Tolerance [mm] [mil]
A Module PCB length 15.0 456.7 +0.20/–0.10 +7.9/–3.9
B Module PCB width 10.0 393.7 +0.20/–0.10 +7.9/–3.9
C Module thickness 2.23 87.8 +0.40/–0.20 +15.8/–7.9
C1 Module thickness at U.FL antenna connector 2.13 83.9 +0.40/–0.20 +15.8/–7.9
ccc Seating plane coplanarity 0.10 3.9 +0.02/–0.10 +0.8/–3.9
ZA3 Horizontal pin of U.FL antenna connector center to left
lower corner
1.40 55.1 ±0.20 ±7.9
ZA4 Vertical pin of U.FL antenna connector center to left
lower corner
5.00 196.8 ±0.20 ±7.9
Module weight [g] <1.0
Table 17: NINA-B410 mechanical outline data
UBX-20035327 - R01

5Mechanical specifications Page 21 of 34
C1-Public