User's Manual

NINA-B1 series - Data Sheet
UBX-15019243 - R05 Early Production Information Related documents
Page 34 of 35
Related documents
[1] NINA-B1 Series System Integration Manual, document number UBX-15026175
[2] u-blox Package Information Guide, document number UBX-14001652
[3] u-blox Short Range AT Commands Manual, document number UBX-14044127
[4] NINA-B1 Declaration of Conformity, document number UBX-XXXXXX
For regular updates to u-blox documentation and to receive product change notifications, register on our
homepage (http://www.u-blox.com).
Revision history
Revision
Date
Name
Status / Comments
R01
5-Nov-2015
ajoh, fbro
Initial release.
R02
22-Feb-2016
ajoh
In Figure 1, replaced GPIO(s) with NFC. Modified Figure 2. Added a new section for NFC
(section 2.2.2) and included pin description for NFC in Table 7 and Table 8. Added Real
Time Counter section (section 2.3.6). Modified sections 2.4.2, 2.5, and 2.6. Split the pin-
out section into mbed/platform (section 3.1) and SPA (section 3.2) and updated these
sections. Updated Figure 2. Updated NINA-B112 radio performance. Updated
mechanical dimensions (section 5). Modified the number of pieces on a reel to 500 in
section 8.1.1.
R03
19-Apr-2016
ajoh
Modified the supported Serial peripheral interface (section 2.4.2).
R04
17-Jun-2016
ajoh, fbro,
mhan, kgom
Renamed Serial Port Application as NINA-B11x firmware. Updated the pin-out (section
3), added extra information about NFC pins and added section 2.7. Switched places of
DSR and DTR pins in B11x firmware pin-out, updated system functions text (section 2.3),
added measurements to electrical specifications (section 4), and a few minor changes.
Included figures for tape orientation and tape dimensions in section 8.1.2. Added
approved antennas list (Table 21).
Document status changed to Advance Information.
R05
09-Aug-2016
ajoh
Updated Sections 6 and 7, document status changed to Early Production Information.