User's Manual

NINA-B1 series - Data Sheet
UBX-15019243 - R05 Early Production Information Qualification and approvals
Page 25 of 35
6.5.2 NINA-B111 labeling requirements for end product
When a product containing a NINA-B111 module is placed on the Taiwanese market, the product must be
affixed with a label or marking containing at least the following information:
Any similar wording that expresses the same meaning may be used. The marking must be visible for inspection.
6.5.3 NINA-B112 labeling requirements for end product
When a product containing a NINA-B112 module is placed on the Taiwanese market, the product must be
affixed with a label or marking containing at least the following information:
Any similar wording that expresses the same meaning may be used. The marking must be visible for inspection.
6.6 Bluetooth qualification information
The NINA-B1 series modules have been qualified according to the Bluetooth 4.2 specification.
The NINA-B1 series modules are Bluetooth listed with Declaration ID TBD. For an end product with NINA-B1
integrated no further qualification is required. If the end product will be Bluetooth listed the QD IDs listed in
Table 20 shall be included in the end product listing.
Product type
QD ID
Listing Date
TBD
TBD
Table 20: NINA-B1 Bluetooth QD ID
內含發射器模組: CCXXXXYYyyyZzW
內含發射器模組: CCXXXXYYyyyZzW