User's Manual

LILY-W1 series - Data Sheet
UBX-15000203 - R04 Early Production Information Antennas
Page 31 of 38
7.2.2 Dual-band antennas
InSide-WLAN
Manufacturer
ProAnt
Gain
+3.0 dBi
Impedance
50 Ω
Size
27 x 12 mm (triangular)
Cable length
100 mm
Connector
U.FL. connector
Comment
Should be attached to a plastic enclosure or part for best performance.
Dual-band (2.4 GHz / 5 GHz) antenna to be mounted on a U.FL connector.
See LILY-W131 Antenna Connector - Reference Design [5] for information how to
integrate the U.FL connector. It is required to followed this reference design to
comply with the LILY-W1 FCC/IC modular approvals.
Approval
FCC, IC, and R&TTE
InSide-WLAN Square
Manufacturer
ProAnt
Gain
+3.0 dBi
Impedance
50 Ω
Size
24x22x1 mm with mounting hole
Cable length
100 mm
Connector
U.FL. connector
Comment
Should be attached to a plastic enclosure or part for best performance.
Dual-band (2.4 GHz / 5 GHz) antenna to be mounted on a U.FL
connector.
See LILY-W131 Antenna Connector - Reference Design [5] for
information how to integrate the U.FL connector. It is required to followed
this reference design to comply with the LILY-W1 FCC/IC modular
approvals.
Approval
FCC, IC, and R&TTE
Ex-IT WLAN RPSMA
Manufacturer
ProAnt
Type
½ wave dipole dual-band antenna
Polarization
Vertical
Gain
+3 dBi
Impedance
50 Ω
Size
107 mm (Straight)
Connector
Reverse Polarity SMA plug (inner thread and pin receptacle)
Comment
To be mounted on a U.FL to SMA or reverse polarity SMA adapter cable.
See LILY-W131 Antenna Connector - Reference Design [5] for information how
to integrate the U.FL connector. It is required to followed this reference design to
comply with the LILY-W1 FCC/IC modular approvals.
Approval
FCC, IC, and R&TTE