User's Manual

LILY-W1 series - Data Sheet
UBX-15000203 - R04 Early Production Information Antennas
Page 30 of 38
InSide-2400
Manufacturer
ProAnt
Gain
+3.0 dBi
Impedance
50 Ω
Size
27 x 12 mm (triangular)
Cable length
100 mm
Connector
U.FL. connector
Comment
Should be attached to a plastic enclosure or part for best performance.
To be mounted on a U.FL connector.
See LILY-W131 Antenna Connector - Reference Design [5] for information how to
integrate the U.FL connector. It is required to followed this reference design to comply
with the LILY-W1 FCC/IC modular approvals.
Approval
FCC, IC, and R&TTE
FlatWhip-2400
Manufacturer
ProAnt
Gain
+3.0 dBi
Impedance
50 Ω
Size
Ø 50.0 x 30.0 mm
Connector
SMA plug (inner thread and pin)
Comment
To be mounted on the U.FL to SMA adapter cable.
See LILY-W131 Antenna Connector - Reference Design [5] for information how to
integrate the U.FL connector.
Approval
R&TTE
Outside-2400
Manufacturer
ProAnt
Gain
+3.0 dBi
Impedance
50 Ω
Size
36.0 x 18.0 x 16.0 mm
Cable length
70 mm
Connector
U.FL. connector
Comment
To be mounted on a U.FL connector.
See LILY-W131 Antenna Connector - Reference Design [5] for information how to
integrate the U.FL connector. It is required to followed this reference design to comply
with the LILY-W1 FCC/IC modular approvals.
Approval
FCC, IC, and R&TTE