User's Manual

LILY-W1 series - Data Sheet
UBX-15000203 - R04 Early Production Information Antennas
Page 29 of 38
Ex-IT 2400 MHF 28
Manufacturer
ProAnt
Polarization
Vertical
Gain
+2.0 dBi
Impedance
50 Ω
Size
Ø 12.0 x 28.0 mm
Cable length
100 mm
Connector
U.FL. connector
Comment
This antenna requires to be mou ted on a metal ground plane for best
performance.
To be mounted on a U.FL connector.
See LILY-W131 Antenna Connector - Reference Design [5] for
information how to integrate the U.FL connector. It is required to
followed this reference design to comply with the LILY-W1 FCC/IC
modular approvals.
Approval
FCC, IC, and R&TTE
Ex-IT 2400 RP-SMA 70-002
Manufacturer
ProAnt
Polarization
Vertical
Gain
+3.0 dBi
Impedance
50 Ω
Size
Ø 10 x 83 mm
Connector
Reverse Polarity SMA plug (inner thread and pin receptacle)
Comment
To be mounted on a U.FL to Reverse Polarity SMA adapter cable . An SMA
version antenna is also available but not recommended for use (Ex-IT 2400
SMA 70-002).
See LILY-W131 Antenna Connector - Reference Design [5] for information
how to integrate the U.FL connector. It is required to followed this reference
design to comply with the LILY-W1 FCC/IC modular approvals.
Approval
FCC, IC, and R&TTE
Ex-IT 2400 MHF 70-001
Manufacturer
ProAnt
Polarization
Vertical
Gain
+3.0 dBi
Impedance
50 Ω
Size
Ø 9.4 x 70.5 mm
Cable length
100 mm
Connector
U.FL. connector
Comment
To be mounted on a U.FL connector.
See LILY-W131 Antenna Connector - Reference Design [5] for information how to
integrate the U.FL connector. It is required to followed this reference design to comply
with the LILY-W1 FCC/IC modular approvals.
Approval
FCC, IC, and R&TTE