Installation Manual

60
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
Configuration Setup
Record the IVU
orientation here.
Click on the Orientation
drop down box and select
from the list of numbers
which refer to the table
listed previously in this
manual.
Keyboard
Enter the Asset Name (usually
the vehicle’s ID) using the
Keyboard below
The Asset type provides a record
of the make and model of the
vehicle.
Select the Object type by clicking
on the object type drop down box
and select the correct vehicle for
the installation.
Once the object type is selected
it automatically populates the
typical dimensions for the
particular vehicle type.
Ensure the location of the GPS
Antenna (Length, Width and
Height) is correct for the install
When completed enter the
passcode before pressing Save
button on the lower right hand
side of the screen, this
configuration is now stored and
system is now ready to use.
This ICON will change
once the Object Type has
been chosen
Inputs – refer Deutsch
Connector table on page 41