Installation Manual

27
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
The client should be consulted to ensure Display Unit is mounted in a mutually agreed position.
The Display Unit should be mounted such that:
• It is compliant with vehicle manufacturer’s instructions, national/local and site regulations.
• It does not to create any additional blind spots.
• The machine operator can easily reach the screen.
• Located within the field of view of the operator.
• It is not a hazard when operator is entering / exiting the machine cabin.
• It has appropriate support so as not to damage any part of the machine.
• Cable routes are carefully considered.
• All machines of the same type have the screen located in the same place
• Mounting provides sufficient support for the Display (self tapping screws into the Dashboard is
not acceptable).
• The display of the installed equipment must never obscure nor obstruct instruments, vehicle
controls or the swept area of the windscreen; neither should their operation distract or impede
the driver.
Display Unit (PROD0839A)