Data Sheet
JODY-W2 series - Data sheet
UBX-18017567 - R07 Functional description Page 8 of 46
C1 - Public
1.4.2 Wi-Fi Simultaneous operation modes
AP Simultaneous operation
o AP + AP - Multi-BSS support (MAX_UAP_BSS = 2)
o AP + AP + STA
o AP + STA
P2P Simultaneous operation
o P2P + STA
o P2P + AP
o P2P + STA + AP
☞ Please note that two or more Wi-Fi interfaces should operate in the same channel.
1.4.3 Bluetooth features
Bluetooth 5 with Bluetooth Low Energy
BDR and EDR packet types – 1 Mbit/s, 2 Mbit/s, and 3 Mbit/s
LE 2 Mbit/s PHY
LE Data Length Extension
LE Advertising Extension
Bluetooth Class 1 and 2
Standard SDIO and UART HCI transport layer
PCM interface for voice applications
1.4.4 General product features
Driver support for Linux, Android
Coexistence with cellular and other on-chip radios
Small footprint (19.8 mm x 13.8 mm), LGA package
Automotive qualification tests (climatic, mechanical, and operating life tests) in accordance with
ISO 16750-4 planned
1.4.5 Reserved MAC addresses
JODY-W2 series modules have four consecutive MAC addresses that are unique for each module
variant. The first two of these four addresses are configured during production.
The first address is used for the Bluetooth communication, while the second address is configured for
Wi-Fi communication. The Data Matrix Code shown on the product label includes the Bluetooth MAC
address, as shown in section 9. The remaining two MAC addresses are not used in the manufacturing
configuration but are reserved for module usage.
MAC address Assignment Last two bits of MAC address Example
Module1, address 1 Bluetooth 0b00
D4:CA:6E:44:00:04
Module1, address 2 Wi-Fi 0b01 D4:CA:6E:44:00:05
Module1, address 3 (free for use) 0b10 D4:CA:6E:44:00:06
Module1, address 4 (free for use) 0b11 D4:CA:6E:44:00:07
Module2, address 1 Bluetooth 0b00
D4:CA:6E:44:00:08
Module2, address 2 Wi-Fi 0b01 D4:CA:6E:44:00:09
Module2, address 3 (free for use) 0b10 D4:CA:6E:44:00:0A
Module2, address 4 (free for use) 0b11 D4:CA:6E:44:00:0B
Table 3: MAC address assignment
For further details about using the MAC address for secondary Wi-Fi interfaces, refer to section 3.8.1
in the JODY-W2 system integration manual [2].