Data Sheet

JODY-W2 series - Data sheet
UBX-18017567 - R07 Functional description Page 7 of 46
C1 - Public
1.4 Product features
Item JODY-W263-A JODY-W263
Grade Automotive Professional
Chipset NXP 88W8987A/S NXP 88W8987
Antenna type
Two antenna pins for Wi-Fi and
Bluetooth
Two antenna pins for Wi-Fi and
Bluetooth
Supported Wi-Fi radio modes IEEE 802.11 a/b/g/n/ac IEEE 802.11 a/b/g/n/ac
Supported Wi-Fi bands 2.5 / 5 GHz 2.5 / 5 GHz
Max. Wi-Fi output power 19 dBm (at antenna pin) 19 dBm (at antenna pin)
Bluetooth version 5.0 5.0
Bluetooth profiles HCI HCI
Supported Bluetooth radio modes Bluetooth BR/EDR
Bluetooth Low Energy
Bluetooth BR/EDR
Bluetooth Low Energy
Supported Bluetooth LE data rates 1 Mbps
2 Mbps
1 Mbps
2 Mbps
LTE coexistence filter - -
OS support Linux / Android Linux / Android
Interfaces SDIO 3.0 (Wi-Fi/Bluetooth)
UART (Bluetooth)
PCM (Bluetooth digital audio)
SDIO 3.0 (Wi-Fi/Bluetooth)
UART (Bluetooth)
PCM (Bluetooth digital audio)
Features
Micro access point with max. 8
connected clients
Micro access point with max. 8
connected clients
Simultaneous client and access point
mode
Simultaneous client and access point
mode
WPA3 WPA3
RF parameters/MAC addresses in OTP RF parameters/MAC addresses in OTP
Max. ambient operating temperature 85 °C (JODY-W263-00A)
105 °C (JODY-W263-01A)
85 °C
Module size 19.8 x 13.8 mm 19.8 x 13.8 mm
Table 2: JODY-W2 series product features
1.4.1 Wi-Fi features
 Standards: IEEE 802.11a/b/g/n/ac/d/e/h/i/k/mc/r/u/v/w
1
 IEEE 802.11ac PHY data rates up to 433 Mbit/s (80 MHz)
 20/40/80 MHz bandwidth
 Simultaneous client and access point operation
 Support of Wi-Fi direct/P2P mode
 128-bit AES hardware crypto engine. TKIP/WEP, AES/CCMP, AES/CMAC, AES/GCMP
 WPA/WPA2 and WAPI encryption is supported by hardware
 SDIO 3.0 host interface for Wi-Fi (and optionally Bluetooth)
 WPA3-SAE is supported in station and AP mode
1
802.11k/r/u/v in STA mode only