Data Sheet

JODY-W2 series - Data sheet
UBX-18017567 - R07 Product handling Page 32 of 46
C1 - Public
8 Product handling
8.1 Packaging
For efficient production, production lot set-up and tear-down, JODY-W2 series modules are delivered
as hermetically sealed devices on tape and reel. For more information about packaging, see the
u-blox package Information Guide Error! Reference source not found..
8.1.1 Reels
JODY-W2 series modules are deliverable in quantities of 500 pieces on a reel. The modules are
shipped on reel Type A, as described in the u-blox package information guide Error! Reference source
not found..
8.1.2 Tapes
The dimensions of the tapes are shown in Figure 13.
Figure 13: JODY-W2 Tape dimensions
8.2 Shipment, storage, and handling
☞ For more information regarding shipment, storage and handling see the u-blox package
information guide Error! Reference source not found..
8.2.1 Moisture sensitivity levels
JODY-W2 series automotive-grade modules are rated at moisture sensitivity level 3. See moisture
sensitive warning label on each shipping bag for detailed information. After opening the dry pack,
modules must be mounted within 168 hours in factory conditions of maximum 30 °C/60%RH or must
be stored at less than 10%RH. Modules require baking if the humidity indicator card shows more than
10% when read at 23±5°C or if the conditions mentioned above are not met. Please refer to J-STD-
033B standard for bake procedure.