User Manual

EMMY-W1 series - User Manual
UBX-16015271 - R03 Product Information Qualification and approvals
Page 32 of 46
7 Qualification and approvals
7.1 Approvals
16
Products marked with this lead-free symbol on the product label comply with the
"Directive 2002/95/EC of the European Parliament and the Council on the Restriction of
Use of certain Hazardous Substances in Electrical and Electronic Equipment" (RoHS).
EMMY-W1 series Wi-Fi modules are RoHS compliant.
7.1.1 European Union regulatory compliance
The EMMY-W1 series module complies with the regulatory standards
Effective use of spectrum:
EN 300 328 V 1.8.1
EN 301 893 V 1.7.1
EMC:
EN 301 489-1/-17
Health and safety:
EN 60950-1:2006 + A11:2009
EN 62311 (WLAN)
EN 62479 (BT)
We declare that the human exposure of these modules is below the SAR limits specified in the EU
recommendations 1999/519/EC.
7.1.1.1 Equipment classes
A multi-radio module is classified as class-1 or class-2 radio equipment depending on the frequency band in
which it can operate. This equipment class is inherited by the end-product that integrates the module, thus it
must be marked accordingly.
Class-1 radio equipment can be placed on the market and put into service without restrictions.
(Article 1 of Commission Decision 2000/299/EC of April 6 2000)
This multi-radio module is defined as class-1 radio equipment when it is restricted to operate in the
following frequency bands:
 Bluetooth , ISM band 2400 – 2483.5 MHz
 WLAN, ISM band 2400 – 2483.5 MHz
 WLAN, U-NII band-2e 5470 – 5725 MHz
Class-2 radio equipment includes restrictions applied by Member States as indicated in Article 1(2) of the
Commission Decision. This class uses the “Alert Sign” as an equipment class identifier.
Figure 13: Alert sign to identify equipment Class-2
16
These approvals are pending.