User Manual

EMMY-W1 series - User Manual
UBX-16015271 - R03 Product Information Electrical specification
Page 24 of 46
Channel
Frequency, GHz
Channel
Frequency, GHz
Channel
Frequency, GHz
36
5.180
100
5.500
144
5.720
40
5.200
104
5.520
149
5.745
44
5.220
108
5.540
153
5.765
48
5.240
112
5.560
157
5.785
52
5.260
116
5.580
161
5.805
56
5.280
132
5.660
165
5.825
60
5.300
136
5.680
64
5.320
140
5.700
Table 23: 5 GHz band supported channels, 20 MHz bandwidth
Channel
Frequency, GHz
Channel
Frequency, GHz
Channel
Frequency, GHz
36 - 40
5.190
100 - 104
5.510
149 - 153
5.755
44 - 48
5.230
108 - 112
5.550
157 - 161
5.795
52 - 56
5.270
132 - 136
5.670
60 - 64
5.310
140 - 144
5.710
Table 24: 5 GHz band supported channels, 40 MHz bandwidth
Channel
Frequency, GHz
Channel
Frequency, GHz
Channel
Frequency, GHz
42
5.210
106
5.530
155
5.775
58
5.290
138
5.690
Table 25: 5 GHz band supported channels, 80 MHz bandwidth
The module is certified to operate as both client and master on channels 1 - 13 (2412 - 2462
MHz), and channel 36 – 48 (5180 – 5240 MHz). On the following channels it is certified to
operate as a client only 52 – 64 (5260 – 5320 MHz), 100 – 116 (5500 – 5580 MHz), 132 – 140 (5660
– 5700 MHz) and 149 – 165 (5745 – 5825 MHz). When the module is set to operate on channels
52 – 64, 100 – 116, 132 – 140 and 149 – 165 it is restricted to only operate using passive scan.
The module is certified to operate with the power tables shown in Table 26 for operation in the
2.4 GHz band and from Table 27 to Table 29 for operation in the 5 GHz band. The specified
values are the maximum permitted output power settings.