User's Manual

Local Navigator Bluetooth Base Station lesswire AG
Page 20
Important notice: It is recommended to test the settings of the FTP server by
running one FTP test session manually. To do this, open a DOS
window and enter the following commands: „ftp“ → <Enter> →
„open localhost“→ <Enter> → „ftp“→ <Enter> → „ftp“. Now a FTP
session is opened by applying the username for the Base
Station. When the command ‘dir’ is issued, the directory ‚bs2’
should be displayed. By entering the command ‚cd bs2’, the
directory setting should be changed to ‚bs2’ and the file
‚fwbs2_xxx.bin’ should be listed. The FTP server is correctly
setup for the automatic firmware update, when this file is listed.
The FTP session can be shut down by entering ‘bye’ at the DOS
prompt.
It is also very important, that directory and file names are
specified in lowercase letters in order to achieve a correct file
download.